Air Source Heat Pump Installation in Barnet

The total cost varies depending on your property size and existing heating system, but typically ranges from £8,000 to £14,000 before the government grant. With the £7,500 Boiler Upgrade Scheme grant available to Barnet homeowners, your out-of-pocket costs could be as low as £500 to £6,500. Libtek provides free, no-obligation quotes for all Barnet properties and handles the grant application process for you.

Most air source heat pump installations in Barnet take between 3 to 5 days, depending on your property's layout and whether any upgrades to radiators or pipework are needed. We'll provide a detailed timeline during your initial consultation and work around your schedule to minimise disruption.

In most cases, air source heat pumps are permitted development in Barnet, meaning you don't need planning permission. However, there are specific conditions that must be met, and conservation areas may have additional restrictions. Libtek is familiar with Barnet Council's requirements and will advise you on whether planning permission is needed for your property.

• Energy Efficiency: They use less electricity than traditional heating systems.

• Environmentally Friendly: They reduce carbon emissions.

• Cost Savings: Lower energy bills in the long run.

• Versatility: Can both heat and cool your home.

• Low Maintenance: Require less upkeep than traditional systems.

An air source heat pump is a system that can heat and cool your home by transferring heat between the inside of your home and the outside air. It works like a refrigerator but in reverse for heating: it absorbs heat from the outside air and transfers it inside your home. In summer, it can do the opposite to cool your home.

Yes, air source heat pumps work excellently in Barnet's climate and are suitable for most property types, from Victorian terraces to modern homes. The key factors are adequate insulation and sufficient outdoor space for the external unit. We've successfully installed heat pumps throughout High Barnet, East Barnet, and surrounding areas. Our team will assess your specific property during a free home survey.

They are very energy efficient, often achieving efficiencies of 300-400%. This means they can produce three to four times more heat energy than the electrical energy they consume.

With proper maintenance, air source heat pumps can last 15-20 years.

They can be installed outside your home, on a wall, or on the ground. They need a bit of space for airflow but don't require too much room.

Yes, they can provide hot water for your home as well as heating.

In many cases, yes. However, they work best with underfloor heating or larger radiators, as they operate at lower temperatures than traditional boilers.

Yes, they can be installed in older houses. However, it's important that the house is well-insulated to get the most benefit. Libtek can advise on any necessary upgrades.

Modern air source heat pumps are designed to be quiet. You may hear a gentle hum when they are running, but they are generally not disruptive.

Yes, they can work efficiently in cold climates, even when temperatures drop below freezing. Advanced models are designed to extract heat from the air even in very low temperatures.

Yes, it’s a good idea to have proper insulation to ensure that the heat pump operates efficiently. Better insulation reduces the amount of energy needed to heat your home.

The £7500 boiler upgrade scheme offers financial assistance to help cover the cost of installing renewable heating systems like air source heat pumps. To take advantage of this, you can check eligibility and apply through the official government website, or consult with Libtek, who can guide you through the process and help with the application.